MENU
Stainless steel Tubes

  • Selected sizes are available in grade SUS304,SUS304L,SUS316 and SUS316L. 
  • Our company can supply not only stainless steel but also special metals such as nickel, titanium, and rare metals.
  • Through over 60years of experience providing stainless steel pipes for medical industry, Any inquiries on matters other than the sizes mentioned above are also welcome.
    ※Please refer to the table below for a general outline of our processing capabilities. 

Stailnell-SteelSUS304,SUS304L,SUS316L,SUS316,etc ・・・
NickelNi200-825, C22, C276, MA23,X750, etc ・・・
TitaniumTi-1 to 12,Ni-Ti, 3AI2.5V, SAT, DAT51, etc ・・・
Rare MetalPt, Au, Ag, Nb, Ta, Zr, etc ・・・
End Cut Normal cut(Rough cut),Square cut(Burr free)
Max O.D for non treated pipe Less than or equal to 10mm 
Max I.D for non treated pipe Less than or equal to 9.4mm 
Min O.D for non treated pipe Greater than or equal to 0.05mm 
Min I.D for non treated pipeGreater than or equal to 0.02mm
Length 1000mm cut,2000mm cut,By inquiry
※Providing with coil also available
MOQ for prototype Will be discussed
Methods for buff treatment Metal brushing,Chemical polishing,Blasting, 
Barrel polishing,etc· · · 

Extra Process

Availability

Slitting 
Hole making 
Tube flaring 
Notching 
Tube blasting
Passivating 
Lazer marking 
Swaging 
Bending etc ・・・
Steel Stainless Tubes

Tubing Guideline<Based on ISO 9626:2016(E)>　/Inches


Inside Diameter
Gauge Standard Out side Diameter Normal Wall Thin Wall Extra Thin Wall Ultra Thin Wall
GlnchesMin　　　　MaxMin　　　　Max
Min　　　　Max
Min
Min
100.13390.1299　－　0.13780.0984　－　0.1109
0.1110　－　0.1181


110.11810.1161　－　0.12400.0866　－　0.0970
0.0970　－　0.1083


120.10630.1043　－　0.11220.0768　－　0.0880
0.0880　－　0.0965


130.09450.0906　－　0.09840.0669　－　0.0770
0.0770　－　0.0850


140.08270.0768　－　0.08460.0591　－　0.0630
0.0630　－　0.0680
0.0680

150.07090.0698　－　0.07480.0512　－　0.0574
0.0575　－　0.0614
0.0614

160.06300.0630　－　0.06650.0433　－　0.0505
0.0505　－　0.0547
0.0547

170.05510.0551　－　0.05940.0374　－　0.0455
0.0455　－　0.0489
0.0490
0.0502
180.04720.0472　－　0.05120.0311　－　0.0358
0.0358　－　0.0409
0.0410

190.04330.0406　－　0.04330.0255　－　0.0295
0.0295　－　0.0334
0.0335
0.0351
200.03540.0339　－　0.03620.0220　－　0.0250
0.0250　－　0.0270
0.0270
0.0281
210.03150.0315　－　0.03270.0193　－　0.0215
0.0215　－　0.0240
0.0240
0.0254
220.02760.0275　－　0.02870.0154　－　0.0173
0.0173　－　0.0205
0.0206

230.02360.0236　－　0.02650.0125　－　0.0145
0.0146　－　0.0181
0.0181

240.02170.0217　－　0.02280.0110　－　0.0135
0.0135　　　          


250.01970.0197　－　0.02090.0091　－　0.0115
0.0115　　　          


260.01770.0173　－　0.01850.0091　－　0.0115
0.0115　　　          


270.01570.0157　－　0.01650.0072　－　0.0094
0.0095　　　          


280.01420.0137　－　0.01460.0052　－　0.0074
0.0075　　　          


290.01300.0128　－　0.01380.0052　－　0.0074
0.0075　　　          
0.0094
0.0104
300.01180.0117　－　0.01260.0052　－　0.0065
0.0065　　　          
0.0075
0.0094
310.00980.0100　－　0.01050.0045　－　0.0049
0.0049　　　          
0.0057
0.0069
320.00910.0090　－　0.00950.0035　－　0.0041
0.0041　　　          
0.0049
0.0057
330.00790.0080　－　0.00850.0035　　　          
0.0041　　　          
0.0049

340.00710.0070　－　0.00750.0025　　　          
0.0036　　　          
0.0041

Tubing Guideline<Based on ISO 9626:2016(E)>　/Millimeters


Inside Diameter
Gauge Standard Out side Diameter Normal Wall Thin Wall Extra Thin Wall Ultra Thin Wall
GMillimetersMin　　　　MaxMin　　　　Max
Min　　　　Max
Min
Min
103.403.300　－　3.500
2.500　－　2.818
2.819　－　3.000


113.002.950　－　3.150
2.200　－　2.463
2.464　－　2.750


122.702.650　－　2.850
1.950　－　2.234
2.235　－　2.450


132.402.300　－　2.500
1.700　－　1.955
1.956　－　2.160


142.101.950　－　2.150
1.500　－　1.599
1.600　－　1.726
1.727
151.801.750　－　1.900
1.300　－　1.459
1.460　－　1.559
1.560
161.601.600　－　1.690
1.100　－　1.282
1.283　－　1.389
1.390
171.401.400　－　1.510
0.950　－　1.155
1.156　－　1.243
1.2441.276
181.201.200　－　1.300
0.790　－　0.909
0.910　－　1.040
1.041
191.101.030　－　1.100
0.648　－　0.749
0.750　－　0.849
0.8500.891
200.900.860　－　0.920
0.560　－　0.634
0.635　－　0.686
0.6870.713
210.80
0.800　－　0.830
0.490　－　0.546
0.547　－　0.609
0.6100.645
220.70
0.698　－　0.730
0.390　－　0.439
0.440　－　0.521
0.522
230.60
0.600　－　0.673
0.317　－　0.369
0.370　－　0.459
0.460
240.55
0.550　－　0.580
0.280　－　0.342
0.343　　　        


250.50
0.500　－　0.530
0.232　－　0.291
0.292　　　        


260.45
0.440　－　0.470
0.232　－　0.291
0.292　　　        


270.40
0.400　－　0.420
0.184　－　0.240
0.241　　　        


280.36
0.349　－　0.370
0.133　－　0.189
0.190　　　        


290.33
0.324　－　0.351
0.133　－　0.189
0.190　　　        
0.2400.265
300.30
0.298　－　0.320
0.133　－　0.164
0.165　　　        
0.1900.240
310.25
0.254　－　0.267
0.114　－　0.124
0.125　　　        
0.1460.176
320.23
0.229　－　0.241
0.089　－　0.104
0.105　　　        
0.1250.146
330.20
0.203　－　0.216
0.089　　　        
0.105　　　        
0.125
340.18
0.178　－　0.191
0.064　　　        
0.091　　　        
0.105

Stainless steel tube & strip

Providing raw material before tubing is also avilable. 
-Special feature for our material-
■Smooth strip surface
■Clean surface
■High straight running stability for smooth tubing
■Uniform thickness

Steel Stainless Tubes